Kürzlich aktualisierte Seiten
Ceiling module | Gyroscope and acceleration sensor GY-521 (MPU6050)
MPU6050 pin configuration Pin number Pin name Description 1 ...
Ceiling module | Shanqiu Mini UPS FX5-48 / Vultec Continuity UPS30PW-DC
Notes There are different versions of the UPS ("USV" is german short name for thi...
Main wiring (ceiling module)
Note: The Smart Steppers are wired with 5V IN at the module side, but not at Duet. The power for...
Duet to effector wiring
General power/wiring concept, consumptions and temperatures
Notes about Trikarus wiring PSU The switching power supply can be switched on and off via a...
Ceiling Module | Point Laser 635 nm LFD635-1-3(12x30.5) by Laserfuchs
This type is a point laser for the projection of a red laser dot and is a laser module which is m...
Ceiling Module | Duet PT100 RTD Board 1.1a
Hardware To connect a PT100 sensor to a Duet, you need a RTD interface board based on the MAX318...
Ceiling Module | Stepper Motors MT-1705HS200AE by Motech Motors
These stepper motor are strong Nema 17 which are installed at the A,B, C and D drives.
Ceiling Module | 4 Port USB Hub GL850G Genesys Logic + 24V DC/DC Converter Traco Power TMA 2405S
Traco Power TMA 2405S Pin 1 = 24V In Pin 2 = GND1 Pin 4 = 5V Out Pin 6 = GND2 ceramic cond...
Ceiling Module | I2C OLED Display 128x64 blue/yellow
The used OLED displays for Smart Stepper have wiring order GND-VCC-SCL-SDA. We figured out that t...
Ceiling Module | Switching Power Supply MW RSP-320-24
closed design (case) with fan, screw terminals Universal input Overload protection by switch-of...
Ceiling Module | DC/DC Converter LM2596S
This module is used to control the current and voltage of the LED spots (COB LED Spot 6000-6500K ...
Ceiling Module | High Endurance Micro-SDHC card 32 GB 100 MB/s UHS Class 3 by SANDISK
This card is used for Raspberry Pi operating system. Because we collect a lot of data which we ar...
Ceiling Module | Router TL-WR842N by TP-Link
This router is the connection end point for Raspberry Pi, Duet 2 Ethernet and local connection cl...
Ceiling Module | Rocker Switch MR-2 by Canal
10A 125VAC ( UL, CUL ) 6A 250VAC(UL, CUL) 10(4)A 250V~ T125/55 (VDE,ENEC)) Snaps into 13 x 19m...
Ceiling module | V2 Silent VR Cables by KIWI
Those items are used to keep the weighy main cable into position while Trikarus is moving. The hi...
Ceiling module | COB LED Spot 6000-6500K 260mA 10V
https://www.ebay.de/itm/173008003388 Power: 3 W Voltage: 9.6 - 10.5 Volt Max. brightness: 30...
Ceiling module | Webcam C920 by Logitech
The webcam is used for remote monitoring and for creating timelapse videos. Especially for long r...
Ceiling module | USB-Stick USB 3.1 32 GB - SANDISK Ultra Luxe
This stick is used to make local backups from filesystem (configs, scripts, Influx data, etc.)
Ceiling module | Relay JQC-3FF-S-Z
This relay is used to switch on the Power Supply by Raspberry Pi GPIO. Specifications in line...