Suchergebnisse

USB Reset way #1 - bind/unbind The following unbind command will kill complete USB chip for session if you type only "1-1". It will cut through SSH so you need to reboot manually. You only want to kill certain parts. So at first list all usb devices and then ...

How to change Vendor / Product ID? For a better control of the dev rules for Smart Stepper the Vendor IDs and product IDs can be changed! This omits to connect to static / fixed ports. https://github.com/Misfittech/nano_stepper/issues/47#issuecomment-5839147...

Smart Stepper command line interface Docs from https://github.com/Misfittech/nano_stepper The smart stepper uses a command line interface where the prompt is “:>” help The help command will return a list of commands that the smart stepper support...

GPIO (General Purpose Input/Output) pins on the Raspberry Pi https://www.raspberrypi.org/documentation/hardware/raspberrypi/gpio/README.md GPIO pins - also called General Purpose Input Output - are the central interface between the Raspberry Pi to external d...

This guide only fits for Trikarus or Hangprinters which make use of RepRapFirmware and closed loop motors with implemented torque mode feature. If you have no closed loop motors, no torque mode or if you run Marlin those procedures are different (other ways of...

Wo ist das Stadtteillager? Siehe https://wiki.stadtfabrikanten.org/books/die-stadtwirtschaft/page/nutzbare-infrastruktur-stadtwirtschaft#bkmrk-stadtteillager Was lagern wir im Stadtteillager? In der Stadtwirtschaft lagern wir aktuell (Stand 01.07.2026) folg...

This is the ongoing replacement extension for the old Plaster. We us this for our self-build pen plotter called Plotty.     This tool can be used with different GCode flavours: Marlin: M280 P0 0..180  (float value) Smoothie: M280 P0 5..10   (float ...