Gallery of printed objects

You can see [Selection of printable objects](https://old.stadtfabrikanten.org/pages/createpage.action?spaceKey=TH&title=Selection+of+printable+objects&linkCreation=true&fromPageId=87064581) for a choice of possibly good ideas to make with a Hangprinter.

13.05.2023 - Maker Bottle (450mm)

620g white PLA filament, 1mm layer height. The can is not solid to keep the water inside. We are trying to close the surface manually. Print time 6h46min.

This turbine surface is about 80mm tall, weighs around 300 g of PLA and printed in ~6 hours with a layer setting of 0.5 mm

This hook is completely working! Weighs about 750 grams

This part is bendable about 180° degrees

https://www.thingiverse.com/thing:3524459

https://www.thingiverse.com/thing:2611564

This print has some cosmetic issues in terms of missing top surface layers (has some holes in it). Reason: wrong slicing. The printed model also has some z shiftings. It was printed over 3 days which longer pauses between. It seems that the D motor sagged down a little bit.

See

Print time: 7h25m

This print failed because bridging failed. Filament layer curled up which produced collision. Good example to see how forces apply while effector is moving around and messing with obstacles. This way the printer really should not run unattended.

Print time: 7h28m

Print time: 7h1m

Print time: 7h28m

Print time: 10h18m

Print time: 3h39m

This model was turned 180 degrees and cut-off to generate that shape

Print time: 2h25m

Print time: 37m